ACT Motor 4Axis Nema23 CNC Kit 23HS2442 Single &Dual Shaft 4.2A 112mm 425oz-in
4 Stück von Act Motor 23 23HS2442 Schrittmotor / Stepper Motor. 4 Stück ACT Motor DM542 Driver. 2 Netzteile / Power Supplies 350W 36V. 1 Breakout Board + 1 Kabel. 1 Netzteil / Power Supply 50W 5V. Back - A+, Green - A-, Red - B+, Blue - B. 1.0 A 4.2A. Working Temperature: -10 45°C, Stocking Temperature: -40 70°C. No condensation, no wanter droplets. Prohibition of conbustible gases and conductive dust.
Der DM542 gehört zu den 2-Phasen Hybrid Schrittmotor Treibern. Die Betriebsspannung liegt zwischen 18 bis 50 VDC.
Der DM542 wurde für alle Arten von 2-Phasen Hybridschrittmotoren entwickelt, die ein Außendurchmesser von 42 bis 86 mm haben und einen Phasenstrom von weniger als weniger als 4,0 A benötigen. The DM542 is a type of two-phase hybrid stepping motor driver. The drive voltage is from 18VDC to 50VDC. It is designed to use with 2-phase hybrid stepper motor of all kinds with 42 mm to 86 mm outside diameter and less than 4.0A phase current.Netzteil / Power Supply 350W 36V. 0-500Hz, 2G 10min/11 Zyklus, 60min, je Achse. 3KVACI/P-FG: 1.5KVACI/P-FG:0.5KVAC. Wish you have a good shopping in my store! The item "ACT Motor 4Axis Nema23 CNC Kit 23HS2442 Single &Dual Shaft 4.2A 112mm 425oz-in" is in sale since Thursday, May 25, 2017.
This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "actmotor2012" and is located in default.This item can be shipped to United States, Canada, Mexico.
- Model: 23HS2442 KIT
- Country/Region of Manufacture: China
- Rated Current per Phase: 4.2A
- Full Load Amps: 4.2A
- Current Type: DC
- Wiring Configuration: 4-Wire Bipolar
- Driver/Controller Bundle: Motor with Driver
- Insulation Class: B (Max 266°F)
- MPN: 23HS2442 KIT
- Full Step Angle: 1.8° (200 Steps)
- Shaft Diameter: 8MM
- IP Rating: IP54
- Holding Torque: 3N.M
- Brand: ACT Motor
- Nominal Rated Input Voltage: 3 V
- Resistance per Phase: 0.9