Shaft Kit Motor

Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver

Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver
Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver

Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver    Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver

4 pcs stepper motor driver DQ542MA. 2 pcs power supply:350W 36V. 1 pc breakout board&cable is free offered. Feel free to contact me for any question!

Step Angle: 1.8 degree. Number of wire leads: 4. Front shaft length: 21mm round shaft. This model is for Single shaft, with 8mm motor shaft, 21mm front shaft length, round shaft! DQ542MA is a type of two-phase hybrid stepping motor driver, the drive voltage of it is from.

It is designed for use with 2-phase hybrid stepper motor of all kinds with. 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts.

Is smiliar to the circuit of servo control which enables the motor run smoothly almost without. Holding torque when DQ542MA runs under high speed, is also significantly.

Higher than the other two-phase driver, whats more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine. CNC machine, and computer embroider machine, packing machines and so on. Average current control, 2-phase sinusoidal output current drive.

Supply voltage from 18VDC to 50VDC. Overvoltage, under voltage, overcurrent, phase short circuit protection. 15 channels subdivision and automatic idle-current reduction. 8 channels output phase current setting. Motor torque is related to speed, but not related to step/revolution. High holding torque under high speed. No condensation, no water droplets. Prohibition of combustible gases and conductive dust. 500Hz, 2G 10min, /11cycle, 60min, each axes. I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC.

DB25 output pin:P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17. DB25 input pin:P10, P11, P12, P13, P15. Output pins:P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17.

Input pins:P10, P11, P12, P13, P15. We are professional stepper motor(stepping motor). Supplier and Manufacuturer, and we can manufacture products according to customer's requirement! Please give us the opportunity to resolve any problem when you have, we will try our best to help you.

If you are not satisfied with the package, please tell us the reason. Changzhou Wantai Electrical Appliance Co. Ltd has powerful technology, mature technics and complete testing equipment.

And we have obtained ISO9001:2000 certification, CE certification and all of our products conform to RoHS requirements. We can manufacture products according to our customer's requirements. Our product are mainly used in Aerospace & Defense, Automation Applications, Commercial Equipment, Industrial Tool, Medical Device & Equipment, Medical Mobility, Printing & Imaging, Pump, Semiconductor Equipment, Vehicle, , Milling Machine, Engraver Machine, CNC Routers Applications, etc. The item "Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver" is in sale since Tuesday, August 17, 2021.

This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\Stepper Motors". The seller is "cncmotor2021" and is located in Rowland Heights, California. This item can be shipped to United States.

  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Full Load Amps: 4.2A
  • Current Type: DC
  • Wiring Configuration: 4-Wire Bipolar
  • Insulation Class: B (Max 266°F)
  • MPN: Does Not Apply
  • Full Step Angle: 1.8° (200 Steps)
  • Shaft Diameter: 6.35mm
  • IP Rating: IP45
  • Holding Torque: 428oz-in
  • Brand: wantai
  • Shaft Type: Single shaft
  • Base RPM: 200-500RPM


Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver    Wantai CNC Kit 4Axis Nema23 Motor 425oz-in single shaft 4.2A&Driver